Pack a Link C7 in the AirPorter Mini

Pack a Link C7 in the AirPorter Mini

Follow these steps to fit a Link C7 into the AirPorter Mini.

 

4655

Parts Inside AirPorter Mini:

1. Hub axle discs
2.Front drop out holder
3. Rear drop out holder
4.Chain ring pad
5. Pedal bag
6.First pad
7. Second pad

 

Tools needed:

15 mm crescent wrench

 

Step 1: Remove both pedals and both wheels using the 15 mm crescent wrench, then insert into the pedal bag.

623

Step 2: Insert the drop out holders to the front and rear dropouts.

624

625

Step 3: Apply the hub axle discs to the right side of the hub axel of the rear wheel and the left side of the hub axle of the front wheel.

626

Step 4: Attach the chain ring pad to the chain ring.
928

 

Step 5: Undo the quick releases to remove the T-bar from the handlepost and the seatpost from the seat tube.

628

Step 6: Place the AirPorter Mini on the floor, open up the cover and lay the buckles on the outside, then place the rear wheel in the bottom left of the AirPorter Mini.

630

Step 7: Place the first pad over the rear wheel and leave the excess padding to overlap the top of the AirPorter Mini.

631

Step 8: Fold the frame and handlepost. Place the folded frame on top of the first pad with front frame half underneath the rear frame half, the rear derailleur at the top left corner and cranks and hinge at the bottom of the AirPorter Mini.

634

Step 9: Wrap the excess padding from the first pad around the handlepost and slide the seatpost between the front and rear frame halves, ensure that the seatpost and frame are protected by sufficient padding.

633

Step 10: Place the second pad over the frame and tuck it between the seat stays.

635

Step 11: Slide the T-bar of the handlepost into the second pad between the seat stays so the handlebar is alongside the top of the AirPorter Mini.

636

Step 12: Place the front wheel on the right side of the AirPorter Mini.

 

692

Step 13: Clasp the buckles shut and cinch tightly.

638

Step 14: Put the pedal bag into the zipper pocket on the inside of the AirPorter Mini Cover.

620

Step 15: Close the AirPorter Mini, zipper it up, set and lock the zipper lock.

622