Fitting a Verge X30h or X18 into the AirPorter Mini

Fitting a Verge X30h or X18 into the AirPorter Mini

These instructions are for the Verge X30h and Verge X18, for the Verge Duo, P18, X10, and X20, please follow the Tern Tech Tip “Fitting a Verge into the AirPorter Mini"

 

Parts Inside the AirPorter Mini:

927

1. Hub Axle Discs
2. Front Dropout Holder
3. Rear Dropout Holder
4. Chainring Protector
5. Pedal Bag
6. First Pad
7. Second Pad

 

 

Tools required :

5 mm Hex Key

 

  

Step 1 : Remove the Pedals and place into the Pedal Bag.

908

Step 2 : Attach the Chainring Protector to the Chainring.

909

Step 3 : Remove the Handlebar by loosening the VRO Adjustment Bolts using a 5 mm Hex Key and sequentially releasing the VRO Stem from the T-bar of the Handlepost.

910

911

912

913

Step 4 : Undo the Seatpost Clamp Quick Release and remove the Seatpost and place aside. Then, remove Wheels and insert the Dropout Holders to the Front and Rear Dropouts.

914

915

Step 5 : Remove the Quick Release Skewer by loosening the Quick Release Skewer Nut and sliding the Skewer out and stow in the zipper pocket on the inside of the AirPorter Mini cover. Then, apply the Hub Axle Discs to the right side of the Hub Axle of the Rear Wheel and the left side of the Hub Axle of the Front Wheel.

916

Step 6 : Lay the AirPorter Mini down flat, open up the cover and lay the buckles on the outside, then place the Rear Wheel in the bottom right corner.

919

Step 7 : Place the First Pad over the Rear Wheel.

920

Step 8 : Fold the Frame and Handlepost. Place the folded Frame on top of the First Pad, crank-side up with the Rear Wheel Dropouts on the left hand side, Cranks at the top and Joint on the right hand side of the AirPorter Mini.

921

Step 9 : Wrap the Rear Frame Half with the First Pad and place the Handlebar along the top edge of the AirPorter Mini in the top left corner.

922

Step 10 : Place the Second Pad over the folded Frame and place the Seatpost on top along the top edge of the AirPorter Mini with the Saddle on the left.

923

Step 11 : Place the Front Wheel on top of the Second Pad, then clasp the buckles shut and cinch tightly.

924

Step 12 : Put the Pedal Bag into the zipper pockets on the inside of the AirPorter Mini cover.

925

Step 13 : Close the AirPorter Mini and zipper it closed. Secure zippers in the zipper lock.

926