Link Frame

Introducing Your Folding Joints: Link B7, C3i, C7, and C7i Bikes with a Q-Lock Handlepost

This article refers to Link B7, C3i, C7, and C7i bikes with a Q-Lock Handlepost.


You want the folding joints on your bike last for the long haul. So, let’s make sure you know how to use and maintain them properly. Start by taking a look at the illustration below. Take note of where the folding joints are located on your bike.

Basic Anatomy

1. FBL™ 2 Frame Joint

  1. Lever
  2. Security Knob
  3. Adjustment Bolt

2. Q-Lock™ Handlepost

  1. Security Knob
  2. Lever

Opening and Closing

Watch the videos below for a quick tutorial on using your Folding Joints. REMEMBER: You must move the Security Knob before opening the Joint Levers.

FBL 2 Frame Joint

Q-Lock Handlepost Joint

How to Adjust

It’s important that the Levers feel stiff when they open and close—but not too stiff. The stiffness is about right if you can use just the pressure of your palm to close the Levers and only 2 or 3 fingers to open them. If your Folding Joints don’t feel quite right, don’t worry, you can adjust them. See the video instructions below.

NOTE: An incorrectly adjusted Folding Joint may cause frame damage or result in rider injury. Please don’t adjust your Folding Joints without proper knowledge or tools.

FBL 2 Frame Joint

Q-Lock Handlepost Joint

Regular Maintenance

Your Folding Joints need to be serviced on a regular basis by an Authorized Tern Dealer. Check out our recommended maintenance schedule and find a dealer near you. Before each ride, make sure you use the ABCQD test to make sure your Folding Joints are in tip-top shape.