Pack a Link C7 in the AirPorter Mini

Pack a Link C7 in the AirPorter Mini

Follow these steps to fit a Link C7 into the AirPorter Mini.



Parts Inside AirPorter Mini:

1. Hub axle discs
2.Front drop out holder
3. Rear drop out holder
4.Chain ring pad
5. Pedal bag
6.First pad
7. Second pad


Tools needed:

15 mm crescent wrench


Step 1: Remove both pedals and both wheels using the 15 mm crescent wrench, then insert into the pedal bag.


Step 2: Insert the drop out holders to the front and rear dropouts.



Step 3: Apply the hub axle discs to the right side of the hub axel of the rear wheel and the left side of the hub axle of the front wheel.


Step 4: Attach the chain ring pad to the chain ring.


Step 5: Undo the quick releases to remove the T-bar from the handlepost and the seatpost from the seat tube.


Step 6: Place the AirPorter Mini on the floor, open up the cover and lay the buckles on the outside, then place the rear wheel in the bottom left of the AirPorter Mini.


Step 7: Place the first pad over the rear wheel and leave the excess padding to overlap the top of the AirPorter Mini.


Step 8: Fold the frame and handlepost. Place the folded frame on top of the first pad with front frame half underneath the rear frame half, the rear derailleur at the top left corner and cranks and hinge at the bottom of the AirPorter Mini.


Step 9: Wrap the excess padding from the first pad around the handlepost and slide the seatpost between the front and rear frame halves, ensure that the seatpost and frame are protected by sufficient padding.


Step 10: Place the second pad over the frame and tuck it between the seat stays.


Step 11: Slide the T-bar of the handlepost into the second pad between the seat stays so the handlebar is alongside the top of the AirPorter Mini.


Step 12: Place the front wheel on the right side of the AirPorter Mini.



Step 13: Clasp the buckles shut and cinch tightly.


Step 14: Put the pedal bag into the zipper pocket on the inside of the AirPorter Mini Cover.


Step 15: Close the AirPorter Mini, zipper it up, set and lock the zipper lock.