Using Child Seats on the GSD Gen 2

Using Child Seats on the GSD Gen 2 Cargo Bike

Updated on 

Heads up!

This article mentions third-party child seats that are not manufactured by Tern. Please note that child seat designs might change, and that their manufacturers may choose to maintain the same product name even after the design has changed.

For your safety, always consult with your bike dealer, or with the child seat manufacturer or reseller, to make sure you have the right seats to safely carry your kid(s).

This article refers to GSD Gen 2 bikes.  If you'd like to use child seats on the GSD Gen 1, click here.

If you want to carry young children on your GSD, you'll need a child seat or two. This article will discuss child seat compatibility and offer guidelines for safe child seat use. 

Contents

 

I want to use child seats without passenger rails—which ones fit the GSD?

Several rear rack-mounted child seats work well with the GSD. Which is right for your family depends on a few different factors, including your desired child seat setup, rider size, and passenger size.

If you only need one seat

If you only need one child seat and can place the seat in the rear position, you can choose pretty much any compatible seat you like, as heel clearance won't be an issue (but keep in mind that if your family grows and you need to add a second child seat, the first seat you choose may limit your options).

Child seat models including Thule Yepp Maxi (version 1), Yepp 2 Maxi, Yepp Nexxt Maxi, and Yepp Nexxt 2 Maxi, as well as Bobike GO Maxi and Urban Iki rear seat will work great for younger kids, while the Qibbel Junior 6+ and the Polisport Guppy Junior can be used for older kids.

yepp family seats
Yep, the Yepp seat names confuse us, too! If you look closely, they all have different designs.

Different seats may offer different features (e.g., suspension, reclining), so you'd want to have your child test out a few to see which best suits your family's needs.

Note: All compatible child seats mentioned in this article fit the GSD rear rack without the need for an adapter.

If you need two seats

If you need two child seats, the Thule Yepp Maxi (version 1) is a convenient choice for many because it offers plenty of heel clearance for riders of all sizes. It's also compatible with all Tern passenger accessories (including those that make up the Clubhouse Fort), which may not be true of every child seat on the market.

However, if you're a small-footed rider carrying a very young passenger in the front child seat, the Thule Yepp 2 Maxi, Thule Yepp Nexxt 2 Maxi, or Bobike GO Maxi may also work—check with your local dealer for assistance. You'll want to test out these seats on your GSD before purchasing to make sure your heel doesn't strike the leg supports or the passenger's foot when pedaling (if you are sharing the bike, make sure all riders participate in testing).

Which child seats can I use with the Clubhouse Gen 3?

If you only need one child seat, any child seat that fits the GSD may be used with the Clubhouse Gen 3. Swap out the Flat Bar for the included Child Seat Expansion Bar to make room for two compatible child seats—Bobike GO Maxi, Urban Iki rear seats, and Thule Yepp Maxi (version 1), Yepp 2 Maxi, Yepp Nexxt Maxi, and Yepp Nexxt 2 Maxi have all been tested to work in pairs with this carrier model.

You’ve read it right. Using the Clubhouse Gen 3 will allow you to fit two child seats from a wider variety of models. If you're considering a pair of seats that wouldn't normally fit on a GSD without passenger rails, check if they are compatible when the Clubhouse Gen 3 is installed—see the compatibility chart for more.

Which child seats can I use with the Clubhouse+?

When the Clubhouse+ is installed with the included Child Seat Expansion Bar, you can either use one GSD-compatible child seat in the rear position, or two Thule Yepp Maxi (version 1) child seats.

Need something quick to help you decide which Clubhouse or child seats to get?

Here’s a handy chart we’ve created to help you find the right Clubhouse and/or child seat(s). Save it on your phone or print it out for something quick you can refer to when you visit your dealer.

Which Clubhouse I should get

Can I use other rear-rack accessories with child seats installed?

Yes! It’s definitely possible to use other rear-rack accessories with child seats.

(I know what I want for my setup—take me directly to the compatibility chart!)

You can use the Clubhouse Fort with up to two child seats to ensure your kids stay protected from the elements. In a one-seat setup, any child seat that's compatible with the GSD will work. In a two-seat setup, which child seats to use will largely depend on the Clubhouse model your Fort is built upon.

Clubhouse Fort

If you want to haul lots of groceries while carrying child seats, you can install the Cargo Hold 52 Panniers. Again, in a one-seat setup, any child seat that’s compatible with the GSD will work. In a two-seat setup, which child seats to use will depend on your shoe size, as it affects the heel clearance for safe riding.

CH52

For a smaller alternative that works with one compatible child seat and can also be used when towing a trailer, we recommend the Cargo Hold 37 Panniers. Your preferred position for the child seat determines where you should place these panniers—for more on this, here’s a handy guide on how to install the Cargo Hold 37s on the GSD Gen 2.

CH37

Whether you choose to go with the Cargo Hold 52s or the Cargo Hold 37s, you’ll want to use them in Bucket Mode so there’s room for your kids’ feet. Some setups will also require the use of a Pannier Adapter or two. Additionally, whether you need the Pannier Adapter Gen 1/Gen 2 may also depend on which Clubhouse model you have, if any.

Check out our chart below for more info on accessory compatibility with child seats, Pannier Adapter requirement, and more:

 1 child seat2 child seats
 Most child seats (rack-mounted)Yepp MaxiYepp 2 MaxiYepp Nexxt MaxiYepp Nexxt 2 MaxiBobike GO MaxiUrban Iki
Clubhouse Gen 3vvvvvvv
Clubhouse FortvvvvLimited heel clearance v
Cargo Hold 52sv*v2v1v2Limited heel clearance1v1v1
Cargo Hold 37sv*      
Clubhouse+vv     
Clubhouse Fortvv     
Cargo Hold 52sv*v3     
Cargo Hold 37sv*      
No ClubhousevvLimited heel clearance Limited heel clearance

Limited heel clearance

 
Cargo Hold 52sv*v3     
Cargo Hold 37sv*      

1 Requires one set of Pannier Adapter Gen 2.

2 Requires two sets of Pannier Adapter Gen 2.

3 Requires two sets of Pannier Adapter Gen 1 or Pannier Adapter Gen 2.

*May require one set of Pannier Adapter Gen 1 or Pannier Adapter Gen 2, depending on your child seat and pannier placement. Please consult with your dealer.

Again, you'll want to test out your child seat setup with all the add-ons on your GSD before purchasing to make sure there’s enough heel clearance to ride safely.

Can I put a child seat somewhere other than the rear rack?

No, we don't recommend using child seats that attach to places other than the rear rack (e.g., handlepost- or seatpost-mounted seats).

We haven't tested these types of seats with the GSD, and they may pose safety risks. Please see this article for more information.

What else should I know about using child seats safely?

We recommend using child seats that conform to EN 14344 standards to carry your child.

Children in child seats (or on any other form of seating) should never be left unattended on the bike, even if it is on the kickstand. Wriggling children can upset the balance of the bike, and a fall may result in serious injuries.

We recommend that all rear passengers, including those riding in child seats, wear helmets.

Note: This article on child seats, along with other guides and how-to articles on this site, are internded to serve only as a helpful resource for Tern bicycle owners. They are for informational and educational purposes only and should be used at your own risk. Consult with your authorized Tern dealer for professional advice and assistance specific to your bicycle

Related Articles


Carry your loved ones with confidence on your GSD Gen 2 bike with the Tern Passenger System. Choose from a variety of seating options and accessories to ensure safety and comfort for you and your passengers.
October 19, 2023

The Pannier Adapter Gen 1 is designed to keep your Cargo Hold 37 or Cargo Hold 52 Panniers secure and prevent dangling straps. Check out our breakdown of options for GSD Gen 1 and Gen 2 models to see if you need the adapter.
October 23, 2023

The Clubhouse Fort for the GSD Gen 2 is the ultimate accessory to keep your kid passengers dry, cozy, and comfy on bad weather days. Our step-by-step guide will help you build the Clubhouse Fort so you can keep the good times rolling all year round.
October 23, 2023

The NBD is the perfect bike to carry your most precious cargo! Check out our recommended child seats and accessories for the NBD, plus some safety tips to ensure a safe and comfortable ride for you and your kid.
October 23, 2023

Looking to carry passengers on your Tern GSD Gen 1? Our Tern Passenger System includes purpose-built rear seating, handhold, foot support, and foot and leg protection to safely carry up to two kids or one adult passenger. Read this article to learn more.
October 23, 2023

Looking to carry your kids on your GSD Gen 1 bike? Check out our guide on child seat compatibility and safe use. We've got recommendations for one and two-seat setups, as well as tips on using panniers with child seats.
October 23, 2023