N-Fold Technology
The faster fold
透過N折疊技術，Tern自行車可通過三個簡單的步驟即可快速的折疊起來，任何人都能快速的折疊和折疊後也能滾動，方便運送。
OCL 框架接頭
Advanced folding technology
任何摺曡車的關鍵是車架，尤其是車架中心的摺疊接頭。 OCL可以安靜的將車框架的兩半鎖定在一起，令OCL成爲折疊框架技術的佼佼者。
Stronger by Design
Making the hinge taller and moving the pivoting surfaces outward from the center axis more than doubles overall strength and stiffness. It’s a difference you’ll feel from your very first ride.
Smooth Operation
The patented design puts four igus® bearings between the aluminum and stainless steel moving parts so the folding action is always smooth and friction-free.
Interlocking Joint
The front and rear joint surfaces lock together to eliminate torsional movement.
Easy to Use
Large rounded surfaces on the lever and joint bodies are easy on your hands and allow good leverage for easy operation.
Doubly Safe
Close the lever and the AutoLok automatically locks in place, for extra, easy security.
Floating Point Technology
Patented technology allows the lever to fold flat and brace against the joint for protection in transit.
Serviceable
Good things are built to last and that’s why the OCL Joint is designed to be dealer serviceable. We keep every part in stock and if your bearings ever wear out, your dealer can replace them in a few minutes.
Precision-Machined
A machining tolerance of only 50 microns ensures a tight fit and eliminates looseness and rattling.
Stainless Steel Hardware
Cold-worked stainless delivers the durability and reliability needed for daily riding in all weather conditions.
DoubleTruss Technology
Stiffer by design
Tern框架的後半部分使用獲得專利的3D 結構（Double Truss)來增强剛度。它能有助抵抗扭轉力。減少彎曲我們的單車。這能大大增强剛度，令到踏板到後輪的動力傳遞得更好，提升騎車的效率。
Tarsus 前叉
Hydroform meets function
單個的液壓成型管與前叉上管組成，Tarsus 為Verge and Eclipse 提供了流暢的造型及優秀的液壓功能。
Hydroformed Tubing
The process of hydroforming aligns the grain structure and strengthens the aluminum material. It also minimizes welding in the most highly stressed area of the fork.
Internal Wire Routing
If you decide to equip your Tarsus with a dynamo hub, it’s ready for internal cable routing, keeping the profile of your bike clean.
Physis 3D Handlepost
The new benchmark
包含五項專利技術和獨特的製造技術共同構成了最緊固的摺叠技術的手柄。Physis採用一種稱為3D鍛造的特殊製造工藝，該工藝由單塊鋁形成，消除了焊縫，帶來更流暢的外形。
No Flex
To eliminate flex, the Physis uses a massive joint knuckle and a post that gradually tapers from thick at the base to thin. Moreover, it has 150% more clamping height between the fork steerer and the handlepost than common designs.
Flux Technology
The base of the Physis is machined so it functions as the upper race of the headset. This patented direct integration contributes to the incredible stiffness of the design.
Interlocking Halves
Joint surfaces lock together to improve torsional stiffness. We've fine-tuned the shape to virtually eliminate squeaks.
Redundant Double Bolts
Two bolts clamp the Physis to the fork steerer for improved safety.
igus® Bearings
The patented design puts sliding bearings between the moving parts so the folding action is always smooth and friction-free.
Large, Smooth Lever
Large rounded surfaces are easy on your hands and provide good leverage for easy operation.
AutoLok Technology
Close the lever and it automatically locks in place, for extra, easy security—using an aluminum pin.
Floating Point Technology
Patented technology allows the lever to fold flat and brace against the joint for protection in transit.
SpringLock Technology
Patented SpringLock technology holds the adjustment rod firmly in place so the locking lever is always properly tensioned and can never vibrate loose.
Serviceable
Good things are built to last and that’s why the Physis is designed to be fully dealer serviceable. We keep every part in stock and replacing the bearings can be done in minutes.
TriSeal Design
Three rubber seals keep weather out and the headset bearings functioning smoothly.
Precision-Machined
A machining tolerance of only 50 microns ensures a tight fit and eliminates looseness and rattling.
Stainless Steel Bolts
Cold-worked stainless hardware delivers the durability and reliability needed for daily riding.
Syntace® VRO 龍頭
Find your fit
爲了令自行車更加適應我們的身體，可調節的龍頭可以因應騎手的調整獲得更舒適的騎行姿勢。
Adjustable
Stems are 47mm in length and infinitely adjustable so you can find your perfect fit.
Syntace quality
Syntace is a boutique German company renowned for their best-in-class bicycle components that are selected by many champion professional riders. They are perhaps best known for their manic attention to detail and brutal testing standards.
Light
Only 120 grams. 100% CNC machined from 6066 aluminum.
Strong
Two stems spaced widely apart means excellent torsional stiffness so go ahead and crank hard on your bars with confidence.
Kinetix® Pro Handlebars
Featherlight
These custom-designed handlebars offer a comfortable 12° backsweep. Even at a super-light 188 grams, they're still incredibly strong thanks to our double-butted design.
Stasis Seatpost by Syntace®
Light AND strong
The Stasis is based on Syntace’s renowned P6 design and is incredibly light, yet durably strong. It is forged from 7075 aluminum and hard-anodized for extra durability. Packed with smart engineering details that make the post easy to use and adjust.
Syntace Tested
Syntace testing is done on what they call the Red Monster and it exceeds the DIN+ standard which is typically used for freeride and downhill components. Needless to say, if it passes Syntace testing, its plenty strong enough for our bicycles.
Light
In the 33.9 x 580 mm size, the Stasis seat post weighs only 447 grams, lighter than many carbon posts of the same size.
Easy Adjustment
Syntace’s ERS technology delivers loads of fore/aft adjustment for the saddle. You can run the saddle forward for zero offset stiffness, or all the way back when you want more room to stretch in the cockpit.
Easy to Use
Two-bolt micro adjustment allows for an infinite number of saddle angles. Obsessive attention to detail means the bolts are angled outward at 40 degrees for easy tool accessibility.
Kinetix® Pro X Wheels
Light, fast, AND strong
Using Rolf’s patented Paired Spoke lacing pattern and updated with a straight-pull spoke design, Kinetix Pro X wheels are the new benchmark for light, fast, and strong.
Paired Spoke Technology
Paired Spoke lacing allows us to use fewer spokes at much higher tensions, resulting in a wheel that is lighter, stronger, and more aerodynamic.
Self-Aligning Nipples
Sapim nipples have a convex surface that allow perfectly straight alignment of the spokes. This increases strength and durability by eliminating the most common type of spoke breakage.
Hand-Built
Kinetix Pro wheels are built by hand from start to finish by a single wheelsmith, who goes through at least three cycles of truing and spoke de-stressing before the wheel meets our rigorous standards.
Kinetix Pro X Hubs
Pro X hubs are precision machined for perfect spoke alignment and roll on buttery smooth sealed bearings. Front and rear hubs feature flanges that are closer together—optimizing the bracing angle for a smaller wheel.
Light Weight
Only 1100 grams
EN Certified
Exceed EN standards for strength and durability.
TruShift Technology
Buttery Smooth
Folding bicycles, with their unique geometries, pose difficulties for front shifting. TruShift Technology optimizes the critical elements so you get nothing but smooth front shifting.
Custom Braze-On
Tern bicycles feature an offset bottom bracket. A custom-tooled braze-on positions the front derailleur optimally relative to the chainring for smooth front shifting.
Custom BB Spindle Length
Tern bicycles feature an oversized seat tube and require a custom spindle length for smooth shifting function. We’re fortunate that our friends at FSA are happy to make their top range MegaEVO spindles to our custom spec’s.
Pulley Position
TruShift Technology includes an optimized pulley position because lower friction equals lower shifting force.
SRAM® XO 2 x 10 Drivetrain
Next Level Shifting
Combining a SRAM XO derailleur with DoubleTap shifters and custom FSA chainrings results in a drivetrain that delivers a wide range and marvelously crisp shifts.
FSA® SL-K Carbon Crankset
Built for Tern
FSA customizes their legendary SL-K crankset with custom rings and a custom spindle length for us. Why? For the best possible front shifting and gear range on our unique frame geometry.
Optimized Chainrings
If you have a bike with small wheels, you have to work a little harder to get good gearing; you can’t just slap a 53/39 crankset on a small-wheeled bike; the gearing will be too low. Our friends at FSA supply us with custom 55/42t rings so you get a wider gear range and fewer overlapping gears.
TrueShift Design
Tern bikes have a unique frame geometry so it takes a bit of work to optimize front shifting. Fortunately for us, our friends at FSA supply us with a custom length spindle that’s the basis for our smooth shifting.
Feather Light
Weighing in at only 619 grams, FSA's hollow-arm carbon cranks are incredibly light.
Excellent Power Transfer
Oversized carbon crank arms, a massive BB386 aluminum spindle, and outboard MegaEVO bearings all add up to a crankset that stiff enough for many of the world’s top racers.
Magnetix 2.0
Keep it together
The Magnetix 2.0 使用強大的磁鐵使自行車保持摺疊狀態，來適應自行車上下樓梯的需要。 Magnetix 2.0的拉力為10-15 Kgf，即使顛簸和四處走動，也能使您的自行車保持折疊狀態。
Luggage Socket
Carry more stuff
將行李固定在行李架並可以插入你需要的收納工具：機架，籃子或袋。並且能夠與KlickFix兼容。